![]() | CDU Methods |
The CDU type exposes the following members.
Name | Description | |
---|---|---|
![]() ![]() ![]() | ADOTableNames | Scans a ADO-compliant database and returns the table names in a VV |
![]() ![]() ![]() | AnSig | Calculate the Analytic Signal of a channel. |
![]() ![]() ![]() | Append | Append a source database onto a destination database. |
![]() ![]() ![]() | AvgAzimuth | Returns average azimuth of selected lines. |
![]() ![]() ![]() | BaseData |
This method corrects an entire database line using a
time-based correction table. It is given 2 input channel
tokens and 1 output channel token as well as the table
object to use.
|
![]() ![]() ![]() | BaseDataEx |
This method corrects an entire database line using a
time-based correction table. It is given 2 input channel
tokens and 1 output channel token as well as the table
object to use (table sort flag=1 for sort, =0 for no sort).
|
![]() ![]() ![]() | BoundLine | Set map boundary clip limits. |
![]() ![]() ![]() | BPFilt |
This method applies a band-pass filter to the specified
line/channel and places the output in the output channel.
|
![]() ![]() ![]() | BreakLine | Break up a line based on line numbers in a channel. |
![]() ![]() ![]() | BreakLine2 | Break up a line based on line numbers in a channel. |
![]() ![]() ![]() | BreakLineToGroups | Break up a line into group-lines based on a channel. |
![]() ![]() ![]() | BreakLineToGroups2 | Break up a line into group-lines based on a channel. |
![]() ![]() ![]() | BSpline | B-spline Interpolate a Channel. |
![]() ![]() ![]() | CalculateDrapedSurveyAltitude | Calculate a draped flight path, enforcing maximum descent and ascent rates. |
![]() ![]() ![]() | CalculateDrapedSurveyAltitude2 | Calculate a draped flight path, enforcing maximum descent and ascent rates. |
![]() ![]() ![]() | ClosestPoint | Return closest data point to input location. |
![]() ![]() ![]() | CopyLine | Copy a line. |
![]() ![]() ![]() | CopyLineAcross | Copy a line from one database to another. |
![]() ![]() ![]() | CopyLineChanAcross | Copy a list of channels in a line from one database to another. |
![]() ![]() ![]() | CopyLineMasked | Copy a line, prune items based on a mask channel |
![]() ![]() ![]() | CreateDrillholeParameterWeightConstraintDatabase | Used for weighting inversion models. |
![]() ![]() ![]() | DAOTableNames | Scans a DAO-compliant database and returns the table names in a VV |
![]() ![]() ![]() | Decimate | Copy and decimate a channel |
![]() ![]() ![]() | Diff | Calculate differences within a channel. |
![]() ![]() ![]() | DirectGridDataToVoxel | Create a voxel using direct gridding. |
![]() ![]() ![]() | DirectGridItemCountsToVoxel | Create a voxel using direct gridding containing the number of data points in each cell. |
![]() ![]() ![]() | Distance | Create a distance channel from X and Y. |
![]() ![]() ![]() | Distance3D | Create a distance channel from XY or XYZ with direction options. |
![]() ![]() ![]() | Distline | Calculate cummulative distance for a line. |
![]() ![]() ![]() | DupChanLocks | Duplicate all channels protect-info from input DB. |
![]() ![]() ![]() | DupChans | Duplicate all channels from input DB. |
![]() ![]() ![]() | EditDuplicates | Edit duplicate readings at individual location |
![]() ![]() ![]() | EMTauTrendWindow | Automatic fitting EM Tau |
![]() ![]() ![]() | Export | Export to a specific format. |
![]() ![]() ![]() | Export2 | Like Export_DU, but include line names as data. |
![]() ![]() ![]() | ExportAMIRA | Export to database an AMIRA data file. |
![]() ![]() ![]() | ExportAseg | Export to ASEG-GDF format file(s). |
![]() ![]() ![]() | ExportAsegProj | Export to ASEG-GDF format file(s) (supports projections). |
![]() ![]() ![]() | ExportChanCRC | Export a channel as XML and compute a CRC value. |
![]() ![]() ![]() | ExportCSV | Export to a CSV file. |
![]() ![]() ![]() | ExportDatabaseCRC | Export a channel as XML and compute a CRC value. |
![]() ![]() ![]() | ExportGBN | Export to a GBN data file. |
![]() ![]() ![]() | ExportGeodatabase | Export to a ESRI Geodatabase file. |
![]() ![]() ![]() | ExportMDB | Export to a Microsoft Access Database (MDB) file. |
![]() ![]() ![]() | ExportSHP | Export to a shape file or files. |
![]() ![]() ![]() | ExportXYZ | Export XYZdata from a database to an XYZ file. |
![]() ![]() ![]() | ExportXYZ2 | Export XYZdata from a database to an XYZ file, using file handles. |
![]() ![]() ![]() | FFT | Apply an FFT to space data. |
![]() ![]() ![]() | Filter | Apply a convolution filter to a channel. |
![]() ![]() ![]() | FootprintCoverageDynamic | Compute the footprint of a survey |
![]() ![]() ![]() | FootprintCoverageStatic | Compute the footprint of a survey |
![]() ![]() ![]() | GenLev | Generate a Level table from an Intersection Table. |
![]() ![]() ![]() | GenLevDB | Generate a Level table from an Intersection Database |
![]() ![]() ![]() | GenXYZTemp | Generate default XYZ template for a XYZ file. |
![]() ![]() ![]() | GetChanDataLST | Populate a LST with unique items in a channel. |
![]() ![]() ![]() | GetChanDataVV | Populate a VV with unique items in a channel. |
![]() ![]() ![]() | GetExistingFeatureClassesInGeodatabase | Searches the geodatabases for an existing Feature class. |
![]() ![]() ![]() | GetXYZNumFields | Get the number of fields in the XYZ file. |
![]() ![]() ![]() | Gradient |
This method takes 4 channels from input database and
duplicats each line twice to output database)
(input and Output can be the same channel).
|
![]() ![]() ![]() | GravDrift | Calculate base loop closure and correct for drift. |
![]() ![]() ![]() | GravDrift2 | Calculate base loop closure, calculate drift correction and correct for drift. |
![]() ![]() ![]() | GravTide | Calculate earth tide gravity correction. |
![]() ![]() ![]() | GridLoad | Load grid data to a database. |
![]() ![]() ![]() | GridLoadXYZ | Load grid data to a database using specified channels |
![]() ![]() ![]() | Head | Applies a heading correction. |
![]() ![]() ![]() | iEMTauAutomatic | Automatic fitting EM Tau |
![]() ![]() ![]() | iEMTauCalc | Fitting f(t) = A * e^(-t/Tau) = e^s0 * e^(-s1*t), where s0=lnA, s1=1/Tau |
![]() ![]() ![]() | iEMTauLateTime | Automatic fitting EM Tau |
![]() ![]() ![]() | iEMTauManual | Automatic fitting EM Tau |
![]() ![]() ![]() | IImportBIN3(CGXNETCore, CDB, String, String, String, Int32, Double, CWA) | Same as ImportBIN2_DU, but returns the name of the imported line. |
![]() ![]() ![]() | IImportBIN3(CGXNETCore, CDB, String, String, String, Int32, Int32, Double, CWA) | Same as ImportBIN2_DU, but returns the name of the imported line. |
![]() ![]() ![]() | ImpCBPly | Import concession boundary polygon file into a database |
![]() ![]() ![]() | ImportADO | Import an external database table into a group using ADO. |
![]() ![]() ![]() | ImportAllADO | Import an entire external database using ADO. |
![]() ![]() ![]() | ImportAllDAO | Import an entire external database using DAO. |
![]() ![]() ![]() | ImportAMIRA | Import an AMIRA data file. |
![]() ![]() ![]() | ImportAseg | Import an ASEG-GDF data file. |
![]() ![]() ![]() | ImportAsegProj | Import an ASEG-GDF data file (supports projections). |
![]() ![]() ![]() | ImportBIN | Import blocked binary or archive ASCII data |
![]() ![]() ![]() | ImportBIN2 | Import blocked binary or archive ASCII data with data error display |
![]() ![]() ![]() | ImportBIN4 | Same as ImportBIN2_DU but with an import mode |
![]() ![]() ![]() | ImportDAARC500Serial | Import Serial data from the RMS Instruments DAARC500. |
![]() ![]() ![]() | ImportDAARC500SerialGPS | Import Serial GPS data from the RMS Instruments DAARC500. |
![]() ![]() ![]() | ImportDAO | Import an external database table into a group using DAO. |
![]() ![]() ![]() | ImportESRI | Import an ArcGIS Geodatabase table or feature class into a GDB group |
![]() ![]() ![]() | ImportGBN | Import GBN data file. |
![]() ![]() ![]() | ImportIoGAS | Import data columns from an ioGAS data file. |
![]() ![]() ![]() | ImportODDF | Import ODDF data file. |
![]() ![]() ![]() | ImportPico | Import a Picodas data file. |
![]() ![]() ![]() | ImportUBCModMsh | Import UBC Mod and Msh files. |
![]() ![]() ![]() | ImportUSGSPost | Import USGS Post data file. |
![]() ![]() ![]() | ImportXYZ | Import XYZ data into the database. |
![]() ![]() ![]() | ImportXYZ2 | Import XYZ data into the database. |
![]() ![]() ![]() | IndexOrder | Change the order of a channel using an index channel. |
![]() ![]() ![]() | Interp | Replace all dummies by interpolating from valid data. |
![]() ![]() ![]() | InterpGap | Replace all dummies by interpolating from valid data. |
![]() ![]() ![]() | Intersect | Create Tie Line & Normal Line intersect table. |
![]() ![]() ![]() | IntersectAll | Create line intersect table from all lines. |
![]() ![]() ![]() | IntersectGDBtoTBL | Create a new intersection table from an intersection database. |
![]() ![]() ![]() | IntersectOld | Use existing intersection table and re-calculate miss-ties. |
![]() ![]() ![]() | IntersectTBLtoGDB | Create a new intersection database from an intersection table. |
![]() ![]() ![]() | LabTemplate | Makes a default template from a lab assay file. |
![]() ![]() ![]() | LoadGravity | Load a gravity survey file |
![]() ![]() ![]() | LoadGravityCG6 | Load a CG-6 gravity survey file. |
![]() ![]() ![]() | LoadLTB | Load LTB into a database line. |
![]() ![]() ![]() | MakeFid | Make a fiducial channel based on an existing channel. |
![]() ![]() ![]() | Mask | Mask dummies in one channel against another. |
![]() ![]() ![]() | Math | Apply an expression to the database |
![]() ![]() ![]() | MergeLine |
Merge a line a the fiducial and copies any data past
that fiducial into the new line.
|
![]() ![]() ![]() | ModFidRange | Insert/Append/Delete a range of fids. |
![]() ![]() ![]() | Move | Move/correct a channel to a control channel. |
![]() ![]() ![]() | NLFilt |
This method applies a non-linear filter to the specified
line/channel and places the output in the output channel.
|
![]() ![]() ![]() | Normal | Set fid of all channels to match a specified channel. |
![]() ![]() ![]() | PolyFill | Fill using a polygon with a value of 1. |
![]() ![]() ![]() | PolyMask | Mask against a polygon. |
![]() ![]() ![]() | ProjectData | Project X,Y channels |
![]() ![]() ![]() | ProjectXYZ | Project X,Y,Z channels from one system to another. |
![]() ![]() ![]() | ProjPoints | Project X,Y(Z) channels with different projections |
![]() ![]() ![]() | QCInitSeparation | Creates the nearest line channels for line separation QC. |
![]() ![]() ![]() | QCSurveyPlan | Create a database containing proposed survey plan in a PLY |
![]() ![]() ![]() | QCSurveyPlan2 | Same as QCSurveyPlan_DU, but lines split by the polygon increment version numbers and keep the line number the same. |
![]() ![]() ![]() | RangeXY | Find the range of X, and Y in the selected lines. |
![]() ![]() ![]() | RangeXYZ | Find the range of X, Y and Z in selected lines. |
![]() ![]() ![]() | RangeXYZData | Find the range of X, Y, Z and Data values in selected lines. |
![]() ![]() ![]() | rDirection | Returns the direction of a line. |
![]() ![]() ![]() | ReFid | Re-fid a channel based on a reference channel |
![]() ![]() ![]() | ReFidAllCh | Simple re-fid of all channels based on a reference channel |
![]() ![]() ![]() | ReFidCh | Simple re-fid of a channel based on a reference channel |
![]() ![]() ![]() | Rotate | Rotate coordinates. |
![]() ![]() ![]() | SampleGD | Sample a GD at a specified X and Y. |
![]() ![]() ![]() | SampleIMG | Sample a IMG at a specified X and Y. |
![]() ![]() ![]() | SampleIMGLineLST | Sample an IMG at a specified X and Y, for a LST of lines. |
![]() ![]() ![]() | ScanADO | Scans an external ADO database and generates a default template. |
![]() ![]() ![]() | ScanAseg |
This method scans an ASEG-GDF file and generates a default
template listing all the channels and all the ALIAS lines.
|
![]() ![]() ![]() | ScanDAO | Scans an external DAO database and generates a default template. |
![]() ![]() ![]() | ScanPico |
This method scans a picodas file and generates a default
template listing all the channels and all the ALIAS lines.
|
![]() ![]() ![]() | Sort | Sort the contents of a channel. |
![]() ![]() ![]() | SortIndex | Create an ordered index of the contents of a channel. |
![]() ![]() ![]() | SortIndex2 | Create an ordered index from two channels |
![]() ![]() ![]() | SplitLine |
Splits a line a the fiducial and copies any data past
that fiducial into the new line.
|
![]() ![]() ![]() | SplitLine2 |
Splits a line a the fiducial and copies any data past
that fiducial into the new line.
|
![]() ![]() ![]() | SplitLineByDirection |
The line is split when the heading (calculated from the current X and Y channels) changes by more than a specified amount over
a specified distance. Additional options to discard too-short lines
|
![]() ![]() ![]() | SplitLineByDirection2 | The same as SplitLineByDirection, but with the option to maintain line types when outputting sequentially numbered lines. |
![]() ![]() ![]() | SplitLineXY |
Break up a line based on tolerance of lateral and horizontal distance, with
options for the output line names.
|
![]() ![]() ![]() | SplitLineXY2 |
Break up a line based on tolerance of lateral and horizontal distance, with
options for the output line names.
|
![]() ![]() ![]() | SplitLineXY3 |
Break up a line based on tolerance of lateral and horizontal distance, with
options for the output line names.
|
![]() ![]() ![]() | Stat | Add a data channel to a statistics object. |
![]() ![]() ![]() | TableLineFid | Place a Line/Fid information into a Channel. |
![]() ![]() ![]() | TableLook1 | Create a new channel using a single reference table |
![]() ![]() ![]() | TableLook2 | Create a new channel using a double reference table. |
![]() ![]() ![]() | TableLookI2 |
Create a new channel using constant integer primary
reference and a secondary reference table.
|
![]() ![]() ![]() | TableLookR2 |
Create a new channel using a constant real primary
reference and a secondary reference table.
|
![]() ![]() ![]() | TableSelectedLinesFid | Place a Line/Fid information into a Channel for the selected lines in the database. |
![]() ![]() ![]() | TimeConstant | Calculate TEM time constant (Tau) |
![]() ![]() ![]() | Trend | Calculates an n'th order trend of a data channel. |
![]() ![]() ![]() | UpdateIntersectDB | Update the Z and DZ values in an intersection database, using the current database. |
![]() ![]() ![]() | VoxelSection | Slice a voxel to a grid under a database line. |
![]() ![]() ![]() | WriteWA | Write data to an ASCII file. |
![]() ![]() ![]() | XyzLine | Break up a line based on tolerance of lateral distance. |
![]() ![]() ![]() | XyzLine2 | Break up a line based on tolerance of lateral and horizontal distance. |
![]() ![]() ![]() | XyzLine3 | Break up a line based on tolerance of lateral and horizontal distance. |
![]() ![]() ![]() | ZMask | Mask dummies in one channel against another(Z) with the range Zmin/Zmax. |